Thoma Technologies
North Canton, OH
Thoma Technologies, Inc. is a full service control system integrator. We design, build program, and provide service for SCADA, programmable controller based systems, and telemetry.
SMG Networks Inc.
Fort McMurray, AB
SMG Networks provides prime and general contractor services for inside and outside plant low-voltage engineering and construction/implementation projects.
Brock Solutions Inc.
Kitchener, ON
Having completed over 5,000 automation projects worldwide, Brock Solutions is one of the largest industrial engineering solution providers of real-time automation systems for manufacturing, transportation and logistics. Brock's 15,000 sq ft Texas location acts as the hub for their US Airports / Baggage Handling engineering and manufacturing team. Brock's clients benefit from tested, reliable solutions and enjoy increased productivity and reduced operating costs.
Bear Automation, Inc.
Fayetteville, AR
Bear Automation, Inc. is a Systems Integration firm in Northwest Arkansas dedicated to providing manufacturers systems to help them be more profitable. With over 18 years experience in the intergration business and our strong background in controls and information systems, we can provide true integration from the shop floor to the top floor.
EMA, Inc.
St. Paul, MN
EMA, Inc., which employs approximately 150 people, is one of the largest consulting firms in the United States specializing in utility automation. Their well-rounded staff members hold advanced degrees in information technology; electrical, chemical, environmental, civil, and mechanical engineering; as well as physics, mathematics, business administration, and management. EMA provides custom automated solutions to help overcome major challenges including population growth, limited budgets, and stringent environmental regulations. EMA helps clients analyze specific information needs and design/implement hardware and software solutions that best fit their requirements. EMA designs and implements automated systems for the following applications: new controls, instrumentation, and information systems for new and existing plants or plant expansions; upgrading and improving existing computer based systems by replacing hardware, updating software, or integrating stand alone systems; replacing automated systems and equipment that are obsolete; and developing strategic computerization plans to guide long-term automation needs.
MB Controls, Inc.
Lexington, KY
MB Controls has been primarily serving the glass industry since 2001. Mike Biles, an electrical engineer, started the company after working in the glass industry for 18 years. During the first few years, the company specialized in Industrial Automation and Controls Systems. Realizing the need to provide customers with a turn-key alternative, MB Controls expanded to include manufacturing design and manufacturing of equipment. Our goal is to have a good match with each of our customers. Once selected as a contractor, we always maintain a priority status with each project, ensuring services received in the future, are as good as the first day on the project.
Stock Fairfield Corporation
Chagrin Falls, OH
Stock Fairfield is a multi-disciplined design/build firm specializing in the automation of industrial manufacturing and power generation processes. Stock Fairfield serves the global marketplace with a staff of 180 professional and skilled trade personnel. Sales offices are located in 23 major cities throughout the United States. The company was founded in 1919 and is privately held. The Process Automation Group specializes in the integration of control and information management technologies and is one of three Stock Fairfield divisions that provide engineering, manufacturing, and construction management services to the following industries: automotive, chemical, food, mining, metals, public utilities, and rubber. Staff experience exceeds 280 man-years of electrical engineering and project management. The unique combination of staff skills is the result of many years of turnkey project implementation. Other services include a 10,000 square foot panel fabrication facility for assembly and staging of hardware, full time on-site construction managers, and custom tailored training seminars conducted with system simulators. Twenty-four hour customer support services are available when needed for critical process applications. Stock Fairfield is committed to the finest quality in design/build services and, at the same time, leading the way in automation technologies.
ControlTek Inc.
Jonesboro, AR
ControlTek, Inc. offers a wide range of electrical control and mechanical services to our clients. These specialized services include the latest in industrial automation programming, electrical design engineering, field installation supervision Robot integration and customized control panels. One of our main objectives is to work closely with the customer to determine specific needs and provide a tailored solution that works.
Acorn Technology Corporation
Cleveland, OH
Acorn Technology is committed to providing customers with control solutions that are well engineered and built to the highest industrial standards. The company specializes in helping customers achieve their machine performance goals with simple proven solutions. In particular, coordinated drive systems implemented with the latest AC vector controls are common among the systems that Acorn produces. With over 50 man-years of design and application engineering experience, Acorn has the depth of capability to deliver solutions ranging from product based to the board level. Industries that have been particularly well served by these capabilities include wire drawing, steel making, rubber and plastics.
Diane Systems
Sofia, Bulgaria
Diane Systems designs, supplies and installs systems for monitoring and control of technological process in the oil & gas industry, systems for local and remote control of hydroelectric power stations and systems for wind power plants. Diane Systems also designs, supplies and installs radio networks for voice and data transmition. Diane Systems offers complex services - design, supply, installation, training, warranty and post-warranty service. The company's activities include consultation, engineering assistance, and development and application of software and special hardware. The company also realizes turnkey projects for the supply and installation of control and measurement systems.
G Systems, Inc.
Richardson, TX
G Systems works with engineers and program managers in the aerospace, defense, and energy industries to create reliable test and measurement solutions. With decades of experience designing and building test systems, G Systems overcomes complex electrical, mechanical, and RF test system challenges by identifying optimal COTS test technology, tailoring platforms, and leveraging proven expertise to achieve each customer's technical, time, and budget specifications. G Systems, founded in 1990, is classified as a woman-owned small business (WOSB). In 2016 G Systems was listed in the Inc.5000 list of fastest growing small businesses, the company Founder and CEO Lynda Harrell was honored as one of the top 25 Women in Business by the Dallas Business Journal and G Systems was awarded the Partner of the Year for the Americas (North and South America) by National Instruments. Vertical products that G Systems retains intellectual property (IP) rights to include the following: ' Automated Screen Gauge Measurement System (Energy Market Segment) ' Optical Inspection System for Oil Field Sand Screen Manufacturers ' High Channel Count Common Core Architecture Automated Test System (Aerospace and Defense Market Segment) ' Low Flow Rate Valve Leak Detection System (Energy and Industrial Automation) ' Applications exist in multiple industries, including: chemical, petrochemical, food processing, power generation ' OEM opportunities abound in various areas, such as hydrostatic testing in the gas and electric industry, and in occupational safety and health administration ' High Speed Video Capture/Playback System ' Configurable solution with 10 minutes of record/playback per channel, configurable area of interest (AOI) selection ' Portable, Rugged Configurable Field Instrument Platform ' Ruggedized real-time systems for oil/gas well-site measurements ' Hazardous location rated systems ' FPGA-based specialty processing
Kasra Hooshmand Engineering Co., P.J.S. (KDI)
Tehran, Iran
Kasra Hooshmand Engineering Co., P.J.S. (KDI) is an Iranian company, specialized in developing machine vision systems, PC based automation and monitoring, industrial automation, data acquisition, LabVIEW programming, microcontroller based systems, instrumentation and also cleanroom design and installation. KDI is the leading machine vision system integrator in Iran and also the only member of Automated Imaging Association (AIA) in the Western Asia.
Pacific Coast Automation, Inc.
Modesto, CA
Pacific Coast Automation, Inc., is a full service systems integration firm, providing services from conception to completion in the area of industrial automation. Due to their vast knowledge and experience, they can provide their customers with solutions that involve one type of system or provide seamless integration across multiple platforms. They provide a competitively priced product without sacrificing quality. The company's services include control systems engineering design, drafting, panel fabrication/testing, PLC/HMI programming, start-up assistance and a variety of other services. They also provide 24/7 on-site support for the Central Valley area of California, in addition to remote access solutions for clients spread across the United States.
Systems Integration Group, Inc.
Honolulu, HI
Systems Integration Group, Inc. is a small business located in Honolulu, Hawaii. Our primary focus has been creating web-enabled control and database applications. Our company currently provides computer integration services including a computer-based, PLC, and embedded automated controls and monitoring systems. Systems Integration Group, Inc. has over 28 years of experience in integrating disparate systems and creating customized computer programs. Our fabrication facilities provide panel building services, large graphic displays, unique gesture based automation controls, and OpenGL 3D visualizations.
SIQ, S.A. (Sistemas IQ, S.A.)
San Jose, Costa Rica
In 1991, Elvatron S.A. started to offer Rockwell Automation solutions as an official distributor (in Costa Rica, Central America) complemented with several other world-class brands. For this reason, Elvatron S.A. developed an engineering department to offer integrated solutions. In 2004, after thirteen years, this engineering department became a separate company named Sistemas IQ, S.A. In those 15 years, Sistemas IQ has developed hundreds of different applications involving process instrumentation, sensors, actuators, software, control systems, and power components. They are an authorized system integrator for Rockwell Automation. Some of their main customers are Intel, Panama Canal, Bridgestone-Firestone, British American Tobacco, CEMEX, Nestle, and Kraft Foods. Services offered include automation project design; wiring diagram designs and drawing; controller programming; control and power panel building; commissioning and start-up services for controllers, software, process instrumentation, and power equipment; project management; standard and tailored project documentation; standard and tailored training (including site training); power quality analysis; phone technical support; and on-demand technical support.
Performance Automation, Inc.
Cincinnati, OH
The Performance Automation Project Team has a combined 30 plus years experience with Machine Vision and Integration. Performance Automation has the knowledge and experience with machine vision hardware, cameras, lenses, and filters to properly design a robust integrated system. Our Machine Vision Projects include optical character recognition and verification, data matrix decoding and grading, gauging, color analysis, feature presence/absence, classify and sort, quality control, and robotic guidance.
Wood
Canton, MS
Wood is a vendor-independent project management, automation and control engineering, procurement, construction and construction management services provider. Formed in 1996 the Automation & Control business consists of a dedicated and focused team of experienced automation experts supported by thousands of electrical, instrument, process and construction professionals. Our business unit is comprised of over 1,400 dedicated automation professionals distributed amongst 17 countries. Whether integrating proprietary or open systems, we are positioned for projects of virtually any size and scope. Wood is involved in a broad range of industries, from virtually all oil and gas segments to automotive manufacturing and fabrication, pharmaceuticals, forest industries, power, industrial, nuclear and mining and minerals. You name the industry, and we serve it. What might be unknown is that virtually wherever Wood goes, so goes our automation and controls experience. Our business model is built around delivering high quality, scalable, and flexible solutions to meet our client's entire project needs, often beyond the project's control system scope.
Ai Control Systems, Inc.
Reading, PA
AI Control Systems offers "concept to completion" professional services for design through integration, fabrication, installation, and maintenance for automation in industry. Our approach is to removes barriers, streamline decision making process and deliver for results. 1.The designer is involved in project from discovery to delivery and assists in startup. 2.Years of experience help us leverage vendors and allows us to find the ideal components. 3.In-house assembly allows for greater accountably and quality of hard wired deliverables
Wood
Paris, France
Wood is a vendor-independent project management, automation and control engineering, procurement, construction and construction management services provider. Formed in 1996 the Automation & Control business consists of a dedicated and focused team of experienced automation experts supported by thousands of electrical, instrument, process and construction professionals. Our business unit is comprised of over 1,400 dedicated automation professionals distributed amongst 17 countries. Whether integrating proprietary or open systems, we are positioned for projects of virtually any size and scope. Wood is involved in a broad range of industries, from virtually all oil and gas segments to automotive manufacturing and fabrication, pharmaceuticals, forest industries, power, industrial, nuclear and mining and minerals. You name the industry, and we serve it. What might be unknown is that virtually wherever Wood goes, so goes our automation and controls experience. Our business model is built around delivering high quality, scalable, and flexible solutions to meet our client's entire project needs, often beyond the project's control system scope.
Automated Interface Solutions
Terre Haute, IN
Automated Interface Solutions builds and services nuclear and non-nuclear thickness gauging systems for use in continuous sheet goods manufacturing. AIS has over 34 years of combined experience working with all types of thickness gauging systems. AIS was formed for the purpose of offering quality gauging systems at an affordable price. One way AIS does this is by utilizing of-the-shelf components. This allows AIS customers the benefit of ordering parts directly at a lower cost than other companies proprietary components. AIS specializes in Opto22 hardware and software, Wonderware Intouch, and the use of x-ray technologies for thickness gauging. AIS has gauging systems throughout the continental United States as well as Europe and India. AIS offers service and upgrades for many OEM gauging systems including; Honeywell, Measurex, ABB, Ohmart, Fife, NDC, Indev, Accuray and many others. AIS is a registered Opto22 partner.
Electrodinamica SA
Buenos Aires, Argentina
Electrodinamica SA (ELEDISA) is an advanced control and information system solutions provider that was founded in 1998 in Argentina. With offices in Buenos Aires, Neuquen, Comodoro Rivadavia and in Santa Cruz de la Sierra, Bolivia, Electrodinamica has established a regional presence in Argentina, Bolivia, Brazil and Chile over the last 10 years. ELEDISA provides engineering design and control panel fabrication outsourcing services for clients and projects in USA. Electrodinamica also provides a variety of services including basic and detailed engineering; control panel design, fabrication, installation, and start-up; industrial process optimization; and design and implementation of customized information technology solutions. Electrodinamica has worked extensively in Argentina, Bolivia, Brazil and Chile and can be a local contact for any part of a project with an end client in South America. This may include pre-engineering services, engineering, machine or control panel building, installation and start-up services. Electrodinamica serves the oil and gas, water and wastewater, food and beverage and other industries.
Global Remote Monitoring Systems
Springfield, PA
Global Remote Monitoring has the technology to measure virtually any condition at a remote or inaccessible site and deliver information about that condition to your browser, phone, computer or fax. Typical applications include machine condition monitoring, predictive maintenance, vendor managed inventory, building automation and energy management. With over 20 years in the business and over 10 thousand installations on 6 continents, we have the proven ability to monitor just about anything, anywhere, at any time.
Insight Automation
Erlanger, KY
Insight Automation is a material handling systems control integrator specializing in conveyor and sortation control systems. With experience in all facets of warehousing, distribution, and manufacturing environments, Insight has provided solutions for most material handling requirements. The Insight team consists of professional controls engineers, project managers, and technical support engineers with a variety of backgrounds and experience levels averaging over 15 years.
NECI
Mansfield, MA
NECI is a full service process controls engineering and systems integration company, providing services and solutions to a wide range of customers in the manufacturing and process industries. The company's control systems expertise includes Emerson, Yokogawa, Allen-Bradley, Wonderware, Intellution, Citect, and many other DCS and PLC systems. NECI's capabilities do not end with the control system. They have implemented numerous systems that require large amounts of data capture using commercial database applications such as Access, Oracle, and dBASE. They can develop custom data applications and drivers using many software packages and technologies. NECI also has extensive experience working on validated batch projects in the pharmaceutical and biotechnology industries.
Lintott Control Systems Limited
Norwich, United Kingdom
Lintott Control Systems Limited is one of the UK's leading Systems Integrators, specialising in Motor Control Centres, Process Software, Telemetry Infrastructure, Chemical Dosing and Water Quality Monitoring Systems. Lintott are able to provide a complete range of services which include design, supply, manufacture, installation and commissioning of complete systems. We operate in a wide variety of industries such as Water, Food and Beverage, Pharmaceutical, Transport, Oils & Gas.
Innovative Products and Equipment, Inc.
Lowell, MA
Innovative Products and Equipment, Inc. has designed and built fully automated custom assembly machines since 1980. IPE works on a wide variety of applications including those for the medical disposables, plastic, automotive, electronic, and toy industries. IPE's understanding of what it takes to satisfy a customer's stringent requirements pertaining to quality, delivery and performance is second to none. IPE is an authorized Adept Technologies, Inc. robot integrator. IPE's staff has been factory trained and field tested. IPE is expert in robot integration and vision system applications. IPE offers a wide variety of technical and professional services all specifically tailored to meet the needs of its customers. These services include fully automated systems, robot integration, specialty machinery and complete manufacturing systems. IPE stands behind its work. It guarantees that any equipment or fixture it designs and builds will meet or exceed the level of performance quoted. IPE is dedicated to doing whatever it takes to satisfy a customer's performance and delivery requirements.
ITE Engineering
Charlotte, NC
ITE offers control system engineering, design, and integration services from an experienced, registered engineer. Careful up-front project planning is emphasized to ensure clients' needs are met with creative solutions at a competitive cost. Diverse project experience with leading technologies and numerous production processes benefits the client by way of tailored designs. A monopoly is not granted to any vendor and the same hardware or software solution is not chosen for all projects; rather, a recommended selection of systems, components, and designs for the specific application is provided. Project documentation and operator/maintenance personnel training are provided before project closeout to ensure that the system will be understood and knowledgeably maintained. Time spent implementing a planned and thorough approach to the control of a process prior to installation reduces capital (first) costs and results in a more efficient and more flexible plant, yielding operational cost savings immediately and reduced upgrade/expansion costs in the future. Bruce M. Judd is chief engineer and principal and is licensed to practice engineering in the states of Georgia, North Carolina, and Virginia.
Glenmount Global an E Technologies Company
Portage, IN
Glenmount Global Solutions is a leading provider of industrial automation and process control systems and equipment. With electrical engineering as its core competence, the company generates revenue from designing, engineering, manufacturing, integrating, testing, installing, training, and maintaining a wide range of world-class quality systems and equipment that utilize leading-edge technology designed by GGS's staff of expert engineers. Its process knowledge and application experience extends to power, instrumentation, PLC and PC-based logic, motion control, motor drive systems, HMI screens, and networking systems for a variety of industrial and marine applications. GGS has recently expanded its capabilities to include complete mechanical design and manufacturing of mechanical equipment.
Delta Systems & Automation Inc.
Rogers, AR
Delta Automation Solutions has developed technology and expertise in industrial automation controls using a PC-based, open architecture system that provides integrated production line performance. Delta's systems can analyze throughput flows, network, capture real-time data, and produce product tracking information. Installations ' concept to delivery ' are completed in an average of eight weeks. Delta can also install a programmable logic controller, a motion controller, and a human-machine interface into one box.
IEAS Limited
Mount Pearl, NL
Industrial Engineering & Automation Solutions Limited, is an engineering company specializing in electrical, instrumentation, controls, and systems integration. The company serves the mining, industrial, marine, oil and gas, utility, and municipal sectors.
Saber Engineering, Inc.
Auburn, CA
Engineering services available from Saber Engineering include system design, software design, electrical engineering, pharmaceutical grade software validation and documentation, and database design. Comprehensive documentation and technical writing are also available. Saber Engineering offers PLC programming services, covering a wide range of PLCs and related equipment, primarily Siemens, Modicon, and Allen-Bradley. As a system partner for Kuka Robotics the company designs and builds turnkey robotic cells for many manufacturing applications, including material handling, packaging, machine vision, palletizing, mechanical assembly, and electronic assembly. Saber Engineering has extensive experience in the field of computer networking, enabling the design and implementation of control systems that consistently exceed customer requirements. The company specializes in a wide range of LAN architectures, including Ethernet, Microsoft Net/BUI, Modbus, Data Highway, ControlNet, DeviceNet and SDS. Saber Engineering is licensed to use frequency and spread spectrum networking technology. The company has a UL-certified control panel fabrication facility that can provide motor control centers, PLC panels, VFD panels, relay panels, and simple pushbutton panels fabricated in the company's own 6000 sq ft. UL-approved panel fab facility. The 11 engineers on the staff of Saber Engineering have over 150 years of combined engineering experience.
Outbound Technologies, Inc.
New Hudson, MI
Outbound Technologies is a full-service System Integrator providing everything from panel design to programming. We have been successful in applying a wide range of control, computing, network, and software solutions in a broad spectrum of industries (approx. 50% process and 50% discrete). The company's staff includes electrical, controls, software, network, manufacturing, and process engineers. We are an ISO 9001:2000 registered company. We offer fixed-price design, build, and commissioning of control systems, as well as hourly project and engineering services. We can do project management, specification development, specification review/reporting, detailing (AutoCAD, EPlan, and PromiseE), electrical and control system hardwire design - from concept to conclusion, and develop sequence of operation documents. Other capabilities include electrical, control, and software integration of peripheral process systems; electrical load studies; lighting design; power distribution design; industrial control panels; instrumentation; electrical field equipment; PLC/HMI/SCADA software specification, design, bench testing and documentation; PC-based control systems; development of system check-out documents; development of operational and maintenance manuals; installation subcontractor management, coordination and site supervision; system start-up, commissioning, validation and launch; and training. Please give us a call, we are happy to talk to you about your needs. Our goal remains the development of long term business relationships based on trust and respect.
Process and Automation Software
Albershausen, Germany
Process and Automation Software is a provider of services in the field of automation solutions. The company offers their customers classical automation services and programming of control directly at the plant, as well as the latest related IT services, networking equipment and integration into the overall ERP system. PAS's services range from the simple integration of sensor technology on the design of controllers for various production systems and their interconnections to the design, implementation and commissioning of highly complex solutions.
USS Vision
Livonia, Mi
USS was established in 1990. USS has become one of the largest, most diverse total turnkey integrators in North America. USS is the largest integrator of it's own products (USS Exact Scan and USS Surface Scan USS Multi View) and BANNER DATALOGIC COGNEX , PPT, Matrox products. The company's success has enabled them to obtain a global blanket with General Motors, providing total turnkey vision error-proofing solutions. Their services include fixture and mount construction, programming, engineering, training, 24-hour help line, maintenance programs, networking, software development and 3D animation control panel construction USS exact scan super hi rez line scan..USS Surface Scan for machine parts and painted surfaces,USS Multi view and USS Multi View.
Shape Process Automation
Auburn Hills, MI
Shape Process Automation is the global leader in flexible robotic Material Removal solutions, providing turnkey robotic systems for over 25 years, with an installed base of over 3,600 robots. Shape Process Automation's industry leading technology provides customers with the most flexible, reliable and productive trimming and cleaning solutions available. Shape Process Automation specializes in high performance trimming applications such as waterjet cutting and router trimming, along with cleaning and deburring processes. Shape Process Automation has has expertise in deflashing, and laser trimming, dispensing, assembly and material handling. Shape Process Automation serves many industries including aerospace, appliance, automotive, composites, construction, consumer goods, renewable energy, marine and plastics industries.
Wunderlich-Malec Engineering
Eden Prairie, MN
Wunderlich-Malec has successfully designed and implemented engineering solutions for commercial, industrial and government clients throughout North America and abroad since 1981. The key to our longevity and continued success is our adaptability combined with the depth of our talent. By offering a comprehensive menu of essential services in combination with a continuous willingness to engage in new challenges, we attract and retain some of the most skilled and sought-after talent in the industry. Wunderlich-Malec is one of the largest and most well-established engineering companies in the United States, with offices throughout the U.S. and more than 400 professionals on staff. We're confident that our qualified staff has the knowledge, experience and talent to create and deliver the solutions you need for your facility, process and operation needs.
Industrial Automation & Control Ltd
Newport, UK, United Kingdom
IAC serves the metals, plastics, paper, chemical, and extrusion coating industries throughout the world. IAC is an approved system integrator for the world's major component manufacturers. They have a wealth of experience in designing control systems for the process industries. Initially founded to provide solutions to the paper industry, IAC diversified into other industries utilising AC drives, DC drives, PLC & SCADA. Projects range from hundreds of pounds to millions with full turnkey capability.
Polycontrols Technologies
Brossard, QC
Polycontrols is specialized in manufacturing custom gas panels. The company also has a IEC/ISO 17025 certified (NIST traceable)flow metrology laboratory for gas and liquids. GAS BLENDERS / GAS MIXERS: Our experience with specialty gases and fluids gives us a strong competitive advantage in applications that require precise concentration of mixtures such as: -Gas mixers for specialty gases -Gas distribution systems -MFC mixing system -Gas blender for OEM application -Chemicals dosing systems -Samples conditioning units -Liquid vaporizer and fluid delivery systems -Test benches for gas and fluids -Gas systems for Pyrometallurgy lab METROLOGY LABORATORY: Polycontrols flow calibration laboratory is certified under ISO/IEC 17025, the highest recognition in metrology. Polycontrols provides gas and liquid ISO/IEC 17025 flow meter calibration services to the aerospace, fuel cell, automotive, medical and process instrumentation industries.
Primary Systems Inc.
Old Bridge, NJ
Primary Systems Inc. is a New Jersey based control and information systems integrator. We design, implement and troubleshoot control and automation solutions for production processes and manufacturing. PSI has over 25 years of experience in: consumer & pet products, materials handling, packaging, cosmetics, specialty chemicals, industrial gases, primary metals, pharmaceuticals and medical device. We support many legacy control systems. We are verified by ISNetworld and PICS.
Upstate Electrical Technologies Inc
Fairport, NY
Upstate Electrical Technologies has evolved over the past 23 years in a focused and deliberate way to meet the needs of their clients. From an electrical contracting/controls panel shop, to a complete controls system integrator, UET provides complete control solutions with standalone PLCs or complete computer HMI/MMI systems. UET designs and builds state-of-the-art, accurate and proven control systems. As a system integrator specializing in industrial refrigeration, building automation, and machine control, they are able to bring together the best equipment available to ensure that their customers benefit from a versatile, user-friendly and extremely reliable control system. The staff of UET is experienced in combining many types of hardware and PLCs to provide truly integrated automation systems. UET provides extensive training to the plant operating staff to assure complete understanding of operating procedures. UET provides all the the engineering, design, manufacturing and testing of the complete control system, providing the end user with the highest quality, off-the-shelf products, assuring quality and reliability. UET also offers contract services providing preventative maintenance and 24-hour off-site facility monitoring.
Sunesis Systems, Inc.
Louisburg, NC
Sunesis Systems, Inc. was started because of the observation that end users rarely get the control systems they need or deserve. Because of limited resources, end users often end up accepting control systems/strategies that are not in line with their best interests. As an independent control system integrator, Sunesis Systems, Inc. is capable and focused on the end user's needs and the best fit solution. With experience dating back into the 1980's, the company has seen many control schemes introduced. Some of these are still in service today and still represent viable solutions. In other areas only the latest and most data-centric solutions are the best fit. Often the best solution it is a hybrid of these systems chosen based on capabilities and the end user's familiarity with them.
Zio Automation, Inc.
Grand Island, NY
Zio Automation Inc. is a company dedicated to providing complete integrated manufacturing solutions. They focus on electrical, computerized control systems and information management as their core business. The company has completed everything from writing the code for a small software project to managing the full integration of a new manufacturing facility. Their staff's structured approach ensures that projects are delivered on time and within budget. Zio has developed a series of advanced programming solutions that provide customers with a remarkable return on their investment. This software system combines the flexible development environment and large storage capacity of a PC with the robust reliability and fast real time emulation capability of an industrial controller.
AC Corporation
Greensboro, NC
AC Corporation is dedicated to providing the highest quality design/build mechanical and electrical services and products. ACC's employee-owners are experienced in the fields of HVAC/mechanical, electrical, controls, plumbing, process piping, air pollution control, project integration, and service and maintenance. ACC has a team of knowledgeable engineers, designers, programmers, and project managers who can meet a client's automation needs with control systems for building services, industrial HVAC, and process control. Their experienced professionals will select, design, program, install, and commission programmable logic controllers, loop controllers for batch and continuous processes, and direct digital control systems to meet a wide variety of customer needs. Services include design and documentation, programming and networking, system commissioning and startup, and fabrication.
Callisto Integration
Richmond, VA
Callisto Integration is a leader in the design, development, and implementation of Enterprise through Advanced Control systems, including MES. Callisto offers a full range of services including shop floor controls and SCADA systems, ERP integration, and manufacturing execution. The company leverages its in-depth knowledge of manufacturing processes to implement solutions that directly address a client's business and manufacturing objectives. Callisto is committed to providing the systems, tools, and training that enhance a client's productivity improvement initiatives. The company provides complete programming of programmable logic controllers (PLC) and supervisory control and data acquisition (SCADA) systems. Callisto has over 190+ experienced professionals with backgrounds in electrical, mechanical, chemical, and computer engineering that are able to solve a variety of complex industrial control problems. Callisto has executed over 4000 projects for companies throughout North America and the world since 1988. The company is a registered member of the Control System Integrators Association (CSIA).
The AutoMate Co., LLC.
Pacific, MO
The AutoMate Co., LLC., is the midwest distributor of Opto22 control hardware and software as well has having a wide range of control systems integration experience. Corporate customers include Olin Corporation/Winchester Western Division, Coca-Cola Enterprises, Applied Food Biotechnology, multiple water and wastewater districts and municipalities throughout the Midwest, Cargill, Inc., Simmons Foods, Baker Refrigeration, State of Missouri Department of Corrections, and more. AutoMate has over 15 years experience in the implementation of Opto22 hardware and software. AutoMate will help clients with the implementation of their projects and can provide the full breadth of hardware to tightly integrate their control and monitoring needs. AutoMate specializes in detail-oriented control and monitoring projects that require additional analysis to implement at a reasonable cost.
INTEA d.d.
Zagreb, Croatia
Summary: INTEA is a joint stock company, founded in Zagreb - Croatia, in March 1991. INTEA is industrial automation and process control systems (PLC, DCS, SCADA, HMI) supplier, designer, and integrator. Products: INTEA delivers complete automation/control systems as well as software applications and spare parts. Services: INTEA offers consulting services, engineering services, and site services. Automation and process control systems specification, HW design, engineering, integration, SW application design, programming, testing, installation, commissioning, start-up and customer training. Post start-up activities: system service and maintenance, spare parts provision, modifications, migration, upgrades, interventions and troubleshooting. References: INTEA took part in more than 150 major automation projects in 35 countries. Industries served: majority of INTEA's projects and references are in: oil & gas, power generation & distribution, metals, pulp & paper, chemicals, food & beverages, cement & glass and building management. Resources: 85% of INTEA's employees are university graduates in electrical engineering. INTEA owns excellent infrastructure and technical resources for applications development: process controllers and SW development/testing systems - ABB (Advant, 800xA IndustrialIT, Master), SIEMENS, Opto22, GE Fanuc, ... INTEA's software and documentation library features large number of ready and proven solutions, program modules, etc. Clients: most important INTEA clients are large engineering, and contracting companies like ABB, ALSTOM and Andritz. INTEA is certified ABB automation technical partner and ABB control systems distributor, integrator and solution provider. ISO 9001 - INTEA is certified since march 2001.
Thor Engineering, LLC
Brentwood, TN
Thor Engineering, LLC is a small private consulting engineering firm with licensed professional engineers in multiple states. Because of our size, we are very responsive to our clients! We pay special attention to our customers' needs and develop simple, efficient solutions that incorporate the latest technology and open architecture. Thor understands the demands of a production environment and works around our client's constraints. Thor Engineering specializes in smaller integration projects that big firms don't want. We also specialize in electrical arc flash hazard analysis and power distribution studies. We will make sure you are in compliance with NFPA 70E and OSHA.
Syntronix, Inc.
St. Louis, MO
Founded in 1988, Syntronix is an established St. Louis-based engineering company strategically focused on PLC and SCADA programming for factory automation. Their projects are developed to be intuitive, easy, and powerful. Their extensive library of SCADA graphics and PLC subroutines reduce development time and costs while increasing reliability and operability. Their core clients have been in the chemical, food and beverage, pharmaceutical, and water and waste industries. Syntronix has been building long term relationships with these clients through continued project success, providing them higher quality and thus better value. The company can give prospective clients a demonstration of how they have helped other companies with intuitive real time graphics, robust PLC programming, production reports, historical and real time trends, and training.
FORTE
Mason, OH
FORTE works with clients to improve distribution and supply chain operations. Bringing extensive supply chain management expertise and advanced analytical tools to all engagements, FORTE works closely with clients to identify, design and implement strategy, process, layout and systems improvements that create significant business value and increase competitive advantage. From roots as a material handling systems integrator, FORTE has taken a practical approach to innovation in both clients' supply chains and internally. Recognized by peers and many industry awards, FORTE is known for its leadership and impeccable track record of success in driving performance for clients' supply chain and distribution operations. Working with FORTE means getting performance-driven solutions designed for your organization and its supply chain initiatives. Designed. Built. Implemented. Put the strength of FORTE's supply chain experience to work for you: supply chain assessment and planning, network analysis, outsourcing and 3PL strategy and assessment, design and implementation, warehouse management system (WMS) selection, and warehouse controls system (WCS) integration and support services. Contact FORTE today to get started with performance-driven solutions for your organization.
Computer Age Engineering Inc.
Marion, IN
Computer Age Engineering, Inc. has been providing automated equipment solutions since 1982. Our specialty is to provide our customers with engineered solutions in the form of complete turnkey machines, process control systems, material handling solutions, and many types of fixtures and tooling. Our experience in the automotive, medical, dental, aerospace, rubber, plastics, food processing, electronics, and warehouse distribution industries gives us an advantage to see solutions from a unique perspective.
BlackBox Technologies
Agawam, MA
BlackBox Technologies is a controls and data acquisition consulting firm specializing in turnkey test systems. From industrial and commercial automated test equipment to military applications, BBT provides proven and reliable systems to the end user. Areas of expertise include custom electronics, computer controls, data acquisition, data analysis, industrial automation, image processing, and advanced software programming techniques. BlackBox Technologies has successfully integrated a wide range of hardware with software for control and data acquisition. Industries served include electronics, research and development, aerospace, lasers, explosives, military, automotive, manufacturing, industrial, and communications. The development of custom electronics includes signal generation, signal conditioning, high voltage systems, high current systems, PID controllers, microprocessors, and digital systems. BBT has provided numerous applications where data is captured, stored, processed, analyzed, and displayed. This data is then used to control a process or system to provide an intelligent application. Third party products such as databases, spreadsheets, and CAD are used in conjunction with other programming tools to control, store, analyze, and display data. BBT primarily provides software solutions using LabView.
Processes Unlimited International Inc
Bakersfield, CA
Processes Unlimited International Inc. is a full-service engineering firm that specializes in the oil/gas and foods industries. The company provides clients with complete engineering solutions for their processing and manufacturing expansion/optimization needs. Beginning with project concept and justification plus front-end engineering through detailed design and project execution, and finishing with installation and start-up, Processes Unlimited is prepared to assist clients with projects from beginning to end or anywhere in between. In 2004 Processes Unlimited merged with Ginosko Inc. and added full-service controls engineering and food engineering expertise to their staff of over 160 individuals.
Integra Teknik Asia, PT.
Jakarta Timur, Indonesia
Pt. Integra Teknik Asia is an employee-owned company founded by fifteen engineers that have educational and practical background in electronics, IT, and telecommunications. The company is an independent automation system integrator focusing on control (such as SCADA, DCS, factory automation, and building automation), security (such as CCTV and motion detector monitoring; vehicle tracking systems; access control; and fire, gas, and smoke alarm systems), paging and annunciators, IT-embedded systems (such as embedded software programming and telecommunication infrastructure for control and security). The company provides outsourcing services for the above business sectors and carries a commitment in providing proper engineers and/or services, from individual engineer daily support to whole corporate resources long-term support. The company strives to meet their customers' needs and solve their problems so they can focus and concentrate on their main/primary business. The combination of independent system integrator and employee-owned company provides an advance benefit to customers so they can rely on each of the company's engineers as they represent the owners of the company. Customers can also rely on the company's objective solution proposal for the selected products and manufacturers involved in the system.
Data Centric Solutions
Poland, IN
Within automated industrial manufacturing there is an area between human interface (OI, HMI) and upper level automation systems refered to as information automation (IA). It's in this space that DCS concentrates its sole business focus. Some examples of solutions/services in this space include design, testing, and implementation of human-machine interface (HMI) systems, operator iterface (OI) sstems, automated data collection systems, data collection reporting systems, key performance indicator system, manufacturing execution systems integration into HMI architecture, custom IA software solutions, IA systems prototyping and testing, design requirements derivation, and OPC solutions expertise. DCS has domain expertise with many different customers and software vendors. Customer markets include tier 1, 2 & 3 automotive; consumer packaged goods; plastics; and pharmaceuticals. DCS has also implemented a variety of applications including automotive; HMI/OI design, implementation, and delivery; automated bill of materials to automation system implementation and delivery; RFID interface to Windows applications and automation controllers; historian design, implementation, and delivery; HMI consulting; distributed HMI architecture consulting; data historian systems design; data collection and reporting; custom R&D IA systems; active display systems and Web servers; SQL server; custom Active X controls; and custom intranet Web user front ends.
Precision Control Integrators, Inc.
Scotts, MI
Precision Control Integrators Inc, located in southwest Michigan, is a complete service company that specializes in controls and automation. The company has highly skilled engineers with direct experience in the pharmaceutical, automotive, pulp/paper, water treatment, food/beverage and petroleum industries. PCI has provided many clients with timely, cost-effective solutions from project conception through custom design, start-up and support.
Epic Engineering, LLC
San Rafael, CA
Epic Engineering is a systems integrator that can provide custom turnkey systems. The firm uses the latest technology in HMI's, PLC's, AC/DC variable speed drives, SCADA, and servo drives. Epic Engineering can provide a custom system to meet a customer's exact needs. Motion control needs are solved using servo systems that can perform multi-axis positioning and cut to length algorithms. Epic's extensive expertise with continuous web and batch process lines has increased the customer's production. Epic Engineering can provide technical consulting and implement the needed modifications and provide 24-hour service on all drives and control systems. All work is guaranteed to perform per the customer's specifications.
Wood
Santa Cruz de la Sierra, Bolivia
Wood is a vendor-independent project management, automation and control engineering, procurement, construction and construction management services provider. Formed in 1996 the Automation & Control business consists of a dedicated and focused team of experienced automation experts supported by thousands of electrical, instrument, process and construction professionals. Our business unit is comprised of over 1,400 dedicated automation professionals distributed amongst 17 countries. Whether integrating proprietary or open systems, we are positioned for projects of virtually any size and scope. Wood is involved in a broad range of industries, from virtually all oil and gas segments to automotive manufacturing and fabrication, pharmaceuticals, forest industries, power, industrial, nuclear and mining and minerals. You name the industry, and we serve it. What might be unknown is that virtually wherever Wood goes, so goes our automation and controls experience. Our business model is built around delivering high quality, scalable, and flexible solutions to meet our client's entire project needs, often beyond the project's control system scope.
Quality Plus Services, Inc.
Hillsboro, OR
Quality Plus Services, Inc. has experience with the major supervisory control and data acquisition software packages available. The primary goal of QPS is to deliver a configured system to the client that is easy to use and easy to maintain. Specialties include implementing third party SCADA software, PLC coding, generating tag databases, communication interfaces to unique devices including OPC servers, SCADA graphics, Windows-based online help, instrumentation databases, developing custom applications, networking, Ethernet, routers, switches, design monitor only and/or full system control over the intranet/Internet and NT RAS, online sequence of operations database configurations (including Micsrosoft SQL and Access), design guides and Microsoft Windows 95/98/NT/2000.
Deterministic Systems, Inc.
Walnut Creek, CA
DSi provides controls design engineering services. The company has decades of experience in networked PLC control systems design and programming. Their professional engineering staff specializes in critical control systems requiring deterministic operations. DSi designs all of the hardware circuits and writes every line of program code in order to tightly integrate the control system to a client's application. DSi offers architecture design services, including hardware design, complete controls architecture design, I/O, power distribution, motor controls, sensors, HMI, data networks, and field wiring. They can program Allen-Bradley uLogix, SLC, PLC, and ControlLogix PLCs for performance, reliability, diagnostics, and operations. DSi specializes in programming the Siemens and Allen-Bradley families of programmable logic controllers in multiple-processor applications. DSi has also programmed controllers from AutomationDirect, OMRON and Mitsubishi as well as Modicon PLCs in various applications. DSi can have a client's distributed control system communicating in any industrial environment. They offer wireless and hardwired communications systems including power-line, SMS, GPRS, RF-modem, cellular modem, Ethernet, Controlnet, Profibus, Modbus, Foundation Fieldbus, RS-232, RS-485, and many PLC-dependent proprietary communications options. DSi provides electrical schematics, a single-line diagram, I/O spreadsheets, panel layout drawings, sensor location crawings, terminations drawings, annotated PLC programs, annotated HMI programs, alarm action spreadsheets, bills of materials, recommended spare parts lists, operational procedures, factory acceptance test procedures, and final acceptance test procedures for every project.
Continuous Control Solutions, Inc.
Des Moines, IA
Continuous Control Solutions Inc., established in 2000, is a real-time optimization, process control, and automation company. CCS designs and manufactures reliable, high quality, state-of-the-art control systems for turbomachineries and process applications. Today the company provides a complete systems building service for oil and gas transportation, chemical, refining, and power industries, incorporating proprietary DMPC (data mining process control) software package for real-time closed-loop optimization and diagnostic analysis. The DMPC activities include on-line data processing, automatic model construction for continuous processes, real-time process optimization, diagnostics and off-line simulation. DMPC provides solutions to optimize process operations and maximize production output while minimizing downtime and reducing utility costs.
Champion Technology Services, Inc. - Baton Rouge LA
Baton Rouge, LA
Champion Technology Services, Inc. was founded in 2000 with a main focus in industrial automation and control systems integration, and has since expanded that focus to include wireless communications and data management. Most automation projects include the design, fabrication, integration, installation, commissioning, and follow-up maintenance of control systems using the latest DCSs, PLCs, HMIs, and hybrid systems. Our telecommunication services include tower maintenance and path surveys. Champion has seven offices spread throughout Louisiana, Texas, Utah and Colorado and serves customers in the surrounding states and throughout the country. When it comes to technology, "we've got it under control!!' For more info, please visit www.champtechnology.com
Cyth Systems, Inc.
San Diego, CA
Cyth Systems helps clients seeking to design and build automated test systems,laboratory and factory automation, machine vision systems, and embedded control systems. Cyth provides hardware and software from the most popular automation vendors, as well as those developed by Cyth to supplement and improve integration. Successful projects need to eliminate risk, meet a schedule, and reduce costs - objectives which Cyth meets by eliminating programming and custom work in favor of existing and proven products whenever possible. Many projects can be reduced from hundreds or thousands of billable hours to mostly packaged products with small integration and configuration tasks. Cyth can train clients to be self-sufficient in maintenance and modifications.
CIMTechniques, Inc.
Beaufort, SC
CIMTechniques specializes in providing simple solutions for complex problems in real-time data acquisition and monitoring systems for industrial, pharmaceutical, bioscience and government agencies. They can provide the components, software and hardware and the client can implement the system, or they can deliver a complete turnkey system including validation services or just about anything in between.
Enhanced Automation
Menomonee Falls, WI
Enhanced Automation is a leading provider of control and systems integration solutions with extensive experience in the food processing, engine control, drive system, and pumping industries. Their mission is to design and deliver robust, reliable and cost effective automation control system solutions that lower customers cost of ownership and increase their profitability. EA's focus is on providing the most cost effective solution including design, build, and commissioning services. With 25 years of experience providing comprehensive engineering and manufacturing service to their OEM partners and customers worldwide Enhanced Automation is prepared to meet your Automation needs.
Circuit Equipment Corporation
Mentor, OH
Circuit Equipment Corporation (CEC) personnel have been in the electronics industry for over twenty (20) years. Most staff members have advanced degrees in science and engineering. CEC has designed, built, and manufactured many products for industry. Area/products are listed below: data acquisition systems for all electronic equipment; machine control injection plastic machine; test measurement equipment design; software for systems integration; hardware for systems integration; relay test systems; resistance test systems; semiconductor test systems.
Morris Controls Inc
Farmington, CT
Since 1994, Morris Controls has been involved in a wide variety of integration projects. The underlying theme of these projects is the use of programmable controllers, SCADA and MMI, motion controllers and vision systems from leading manufacturers. The result is a portfolio of open solutions with well supported components. A detailed list of projects can be found on our website. Highlights include the control system for the pool platforms for the "O" show at the Bellagio Hotel in Las Vegas and the control of the pirate ship at the Treasure Island Hotel, also in Las Vegas. Other work includes design, construction and installation of control systems for assembly machinery, electroplating lines, presses, furnaces and calenders throughout the US.
Grantek Systems Integration Inc.
Burlington, ON
Grantek Systems Integration is a leading provider of integrated manufacturing automation services. The company's innovative solutions are designed to increase their clients' return on investment and reduce time to market through improved manufacturing productivity, product quality, asset utilization and integrated technology. Their clients are among the most respected manufacturers of global brands, as well as niche manufacturers seeking improved performance and competitive advantage. Since 1980, Grantek has been enabling greater profits to clients by creating better processes for them in new plant installations; continuous improvement initiatives; conversion of non-automated facilities; and support, maintenance and troubleshooting. Through their total system solution approach and the dedication of of their professional staff, the Grantek team guarantees a manufacturing facility, line or process that has been skilfully designed, professionally engineered and executed for a vertical start-up. Grantek is a full service systems integration company dedicated to providing services to the manufacturing community in the areas of building automation, packaging solutions, control systems design, panel fabrication, information management, process design, IT design and support, project management, electrical design, RFID solutions, ERP integration, simulation, MES implementation, and web-enabled solutions. Grantek Systems Integration has offices located in Illinois, Pennsylvania, Ohio, California, Ontario, Quebec, and British Columbia.
Panelogic Inc
Corning, NY
Panelogic Inc specializes in industrial control systems from concept to design, build, software, installation, start-up, and support. In addition to Panelogic's engineering staff, the company has an in-house CAD system utilizing AutoCAD and a panel shop for build-to-print or custom enclosures and control systems.
Wunderlich-Malec Engineering
Calabasas, CA
Wunderlich-Malec has successfully designed and implemented engineering solutions for commercial, industrial and government clients throughout North America and abroad since 1981. The key to our longevity and continued success is our adaptability combined with the depth of our talent. By offering a comprehensive menu of essential services in combination with a continuous willingness to engage in new challenges, we attract and retain some of the most skilled and sought-after talent in the industry. Wunderlich-Malec is one of the largest and most well-established engineering companies in the United States, with offices throughout the U.S. and more than 400 professionals on staff. We're confident that our qualified staff has the knowledge, experience and talent to create and deliver the solutions you need for your facility, process and operation needs.
Integrated Solutions and Technologies, Inc.
Mountainside, NJ
IST is an innovative solution and services provider for the industrial and municipal marketplace; including FDA regulated industries, consumer products, food & beverage, chemicals, petrochemicals, water/wastewater, & utilities. IST works on behalf of our clients to join the right products, with the best-engineered solutions in order to solve the most challenging business issues. Our professional management team, coupled with our broad technical capability and experienced personnel, can provide each client with the resources needed to handle projects of any size, scope, or duration. Each person in our organization contributes their individual expertise and industry experience on your behalf to deliver the most accurate solution available. Our project involvement can include: design, engineering, specifications, drafting, project management, procurement, panel fabrication, documentation, system programming and configuration, custom interfaces, data collection, reporting, system integration, commissioning, training, and ongoing maintenance support. Our vertical data integration expertise allows IST to integrate data from the manufacturing floor to the business systems to allow decision makers to make informed, profitable decisions in a timely fashion. The technology utilized is based on solutions and products from leaders in automation and software which provides our clients with a system that can be maintained, expanded, and upgraded throughout the life cycle of the system. IST's mission is to deliver the best solutions that your business needs to enhance productivity, reduce costs, raise profits and provide a global competitive advantage
Brusche Industrial Automation
Almelo, Ov, Netherlands
Since 1957 Brusche Industrial Automation has become a key player in the field of electrical engineering in the eastern part of the Netherlands. Being a company in Twente, we are proud of our attitude and mentality which all our clients appreciate. This, as well as our knowledge and experience make Brusche Electrical Engineering the ideal partner for your industrial automation projects. Brusche Electrical Engineering is the right contact when it comes to automation of your operating system or your production environment. Client focused solutions in the field of adjustment, measurement, regulation, monitoring and control are only possible by providing custom made solutions. Custom made for both small solutions as well as larger solutions. We have chosen to carry out all electrical and automation work in-house, so you will have one contact for all your Industrial Automation projects. Brusche Electrical Engineering is a system integrator, operating in the area of process- and production automation and machine control. Of course we look very carefully at your organisation, your market, your business processes and your objectives. Also system demands, desires and problems within all levels of your company will be involved. This enables us to translate any system issue into an adequate and efficient solution where the security of your process is paramount. Our clients represent several industries, from concrete to plastics industry, from food to environmental projects and from special machines to process industry. Our activities in the field of industrial automation include: - Design, engineering and consultancy - Design, mounting and installation of control panels, MCC, switch boards, etc. - PLC and IPC control systems - Motion Control - Tracking & Tracing (including Vision and RFID solutions) - HMI & SCADA solutions - MES/OEE implementations - UL- & EX control panels - Machine safety - Service and Support (24h/7d)
S&H Systems
Batesville, AR
As a turn-key system integrator, we partner with our clients to deliver solutions that help solve their most complicated needs. Utilizing 125 years of experience, S&H Systems goes beyond the norm developing new insights and driving better results to grow your business. Our services are designed specifically to make your business as efficient and profitable as possible. We work with you to help solve your challenges, on time, and within budget. Let our experienced system integration team evaluate your present operations and make recommendations for improvements so that you can continue building your future'
Vertex International, Inc.
Roanoke, VA
Vertex International offers turnkey automation, measurement and monitoring solutions for industry, plus full-service, on-site technical support and equipment repair. For over 30 years, Vertex has supported the technical needs of the can manufacturing and can filling industries. Online process monitoring (seam weld quality) and semi-automatic dimensional measurement make up the bulk of their activity. During this time, they have installed, commissioned and supported systems manufactured by international suppliers. Their turnkey service includes on-site training and custom hardware/software solutions. Recently, they began selling a micro flow monitor product based on a custom microcontroller of their own design. They are Integrators for Inductive Automation's revolutionary new 'Ignition' SCADA software. Their capabilities include software and hardware design, surface-mount electronic prototype production and sourcing for quantity automated production of custom designs.
SYCON International, LLC
Lafayette, LA
SYCON International, LLC is dedicated to providing high-quality, cost-effective industrial automation solutions and services with dependability, honesty, and integrity. The company places the utmost importance in building and maintaining relationships with their customers, employees, vendors, and partners.
EXBIT Ltd.
Stara Zagora, Bulgaria
EXBIT Ltd. engineers, designs, installs and services industrial automation control systems. The company offers installation and commissioning of electrical and process control equipment for production plants as well as configuration, programming and system integration for PLCs, fieldbus networks, OPC, SCADA, MES, ERP. The company also develops application software.
RASP Incorporated
Gansevorrt, NY
RASP Incorporated was established in 1995 and for over 25 years has focused on delivering industrial control projects in a timely manner while maintaining quality as a fully insured system integrator and industrial controls manufacture. RASP is a certified ISO 9001:2015 company, UL508A in addition to UL for hazardous areas and maintains an A+ Better Business Bureau rating. We provide turn-key or any portion of engineering, software design, AutoCad, panel manufacturing, installation, testing and commissioning. Typical applications include motion control, machine control, power, medical, aggregate and mills for both new and upgrade systems.
Leader Automation
Thornton, CO
Leader Automation provides control system engineering, programming, and panel-building services for a variety of industries. Leader Automation is a small, flexible solutions provider, dedicated to staying on the leading edge of technology. They are ready to bring the most intelligent and robust process control and plant floor information to every client. The company offers design and fabrication of control panels, development of process & instrumentation diagrams, PLC programming with full documentation, HMI development, vision system integration, documentation/CAD, system fault diagnosis and repair, process improvements/additions, upgrades/retrofits, and installation and commissioning.
Flexware Innovation
Fishers, IN
Navigating the digital transformation of your manufacturing process requires not only smart technology integration, but the experience to navigate the change management issues that come with it. Flexware Innovation is the go-to engineering firm for forward-thinking manufacturers that need to integrate their business and production systems to maximize their resources. Founded in 1996, our highly-skilled teams of dedicated professionals work side-by-side with customers to leverage technology to solve real business problems by providing best-in-class software development, automation engineering, manufacturing systems integration, business intelligence solutions, Internet of Things (IoT) devices and specialized product development. Our passion is helping our customers avoid costly architectural mistakes and design, architect, and build solutions that stand the test of time. When it comes to manufacturing IT and engineering, we don't just get it done - we get it done right.
Mangan, Inc.
Sugar Land, TX
Mangan Inc. is a nationally-recognized and employee-owned Specialty Engineering, Automation and Integration company serving the Critical Process Industries where successful project results are not negotiable. Leading Industry talent and Cutting Edge Technical Solutions have fueled a respectable list of long term clients. Industries Served - Refining, Chemical, Pipeline, Oil and Gas, BioPharmaceutical, Power & Distribution, Renewable Energy (Solar/Wind),and Utilities. Mangan, Inc. has nearly 350 direct employees that operate from nine offices across the United States: CA - Long Beach, WestLake Village and Concord, NC - Cary, TX - Houston, Lake Jackson, GA - Alpharetta, CO - Boulder, NH - Hampton. Mangan, Inc. has grown from $10MM in 1999 to over $50MM in 2015.
ITS Automation & Controls Inc.
Delta, BC
ITS Automation has been operating since 1976 and currently has ten staff members. The principal owners are backed up with experienced engineers and designers that have been working for many years with the company and form the nucleus of the design team. Their focus is on the implementation of cost-effective power, control, instrumentation, PLC and HMI systems best suited for the project at hand. Their goals are realized through close communication with clients and all equipment suppliers involved, as well as on site start-up assistance. This formula has proven to be the base for successful plant start-up and operation and, ultimately, satisfied and repeat clients.
WIIC Solutions
Ensenada, BC, Mexico
WIIC Solutions is a company that designs and builds automated equipment for national and international industry. We combine our experience engineering, operation and maintenance with our knowledge of equipment and products to create automation solutions that enable our customers to meet the functional and financial objectives of its industrial process. We design and integrate automation equipment, in WIIC we take care of the instrumentation and control, program equipment, develop database applications, networks, software applications, SCADA and control systems in motion.
Wunderlich-Malec Engineering
Green Bay, WI
Wunderlich-Malec has successfully designed and implemented engineering solutions for commercial, industrial and government clients throughout North America and abroad since 1981. The key to our longevity and continued success is our adaptability combined with the depth of our talent. By offering a comprehensive menu of essential services in combination with a continuous willingness to engage in new challenges, we attract and retain some of the most skilled and sought-after talent in the industry. Wunderlich-Malec is one of the largest and most well-established engineering companies in the United States, with offices throughout the U.S. and more than 400 professionals on staff. We're confident that our qualified staff has the knowledge, experience and talent to create and deliver the solutions you need for your facility, process and operation needs.
Dillon Engineering Corporation
Tulsa, OK
Dillon is a professionally registered and licensed engineering firm that provides electrical/instrument & control systems integration services required for industrial automation and control systems. Dillon's main advantage to the customer is that Dillon is a bias-free third party integrator that is not affiliated with any manufacturer. This allows for the utilization of the best equipment from several manufacturers to form a complete operating system. Dillon services range from consulting to turnkey projects. Dillon can provide single source responsibility to reduce cost, save time, and avoid finger-pointing if problems arise.
PLC Automation, Inc.
Sparks, NV
PLC Automation, Inc. is a technology-driven company with large scale goals in the industrial automation and process controls industry. They work closely with corporate management and engineers in the field to provide development and technical expertise to any size project in any industry.
PaR Systems, Inc.
Shoreview, MN
PaR Systems, Inc., a US company headquartered in Shoreview, Minnesota, provides advanced intelligent material handling, automation and robotic equipment and systems solutions. PaR has developed 100's of product platforms which form the basis of 1000's of tailored solutions for complex applications across numerous industries. PaR Systems has developed processes to successfully deliver both standard products and custom equipment using extensive libraries of standard platforms. PaR Systems began in 1961 with the development of remote manipulators when the growth of the nuclear industry created a demand for remote handling equipment. PaR Systems evolved their manipulator arms technology for remote fuel handling. During the 1980's the company continued to develop this technology in the robotics industry, beginning with aerospace, for applications that require drilling, milling, routing, waterjet cutting and material handling. Since then, PaR has increased its expertise to provide a variety of specialized applications, building on the automation capability developed across a wide range of demanding industries. PaR Systems offers complete engineering and manufacturing capabilities for special applications. For example, PaR Systems built the two largest operating robots in the world - a neutron and x-ray system to inspect fully assembled jet fighters for hidden damage in order to certify the planes for flight; and one of the world's tallest automated cranes for NASA to inspect the solid rocket motors of the space shuttle. They have also delivered a number of small-scale automation products used in applications such as disk drive read/write head manufacturing.
Action Equipment Solutions, Inc.
Georgetown, KY
Action Equipment Solutions, Inc. has over 25 man-years of experience in control systems integration and factory automation. Material handling and machine vision being mainstays of their projects, AESI prides itself on taking on projects that most integrators feel are too difficult to do. Whether the project is automotive, chemical, process, etc., the AESI team is ready for any project.
Industrial Concepts, Inc.
Hartsville, SC
ICI provides plant automation and system integration services for a variety of processes ranging from waste water treatment to pharmaceutical. While a young company, ICI's client base has been formed from 15-20 year relationships. ICI's focus is customer support and personal attention to detail. ICI is primarily focused on system integration and has an engineering partner that provides full service engineering (structural, mechanical, electrical, instrumentation and environmental). This relationship allows for strong project support from start to finish, with lower overhead, providing clients with a more flexible support staff at significantly reduced cost.
SES Automation Inc.
Toronto, ON
SES Automation is an engineering firm providing full range of electrical and automation services for drives, controls and industrial automation systems. We are both Engineering Consultants and Control System Integrators and since 1991 our group completed many major projects for metal processing as well as other industries. Our services are aimed at increasing your competitiveness by making your systems work more efficiently and speeding up your return on investment by improved productivity. We provide custom system design services to meet your objectives. We also supply a variety of standard engineering and software products. SES can help you in various AREAS: ? Audits system and energy management studies with evaluation and solution report ? Feasibility studies new systems or upgrades, including specification reports ? Design - new systems or upgrades, with or w/o supplying the system components ? Installation engineering services commissioning
TECNOGAM
Garcia, NL, Mexico
TECNOGAM es una Empresa de Profesionales en las Ingenierias de Control, Automatizacion, Electrica y de Seguridad Electronica al servicio de la Industria Nacional e Internacional ofreciendo soluciones creativas e innovadoras con el mejor costo-beneficio para sus clientes.
Holland-Controls
Hengelo, Netherlands
Holland-Controls provides optimum control system solutions for existing turbines, reciprocating engines and related equipment. Their challenge is to offer dedicated solutions using off-the-shelf components from renowned manufacturers. This offers their customers the benefit of focused knowledge, great experience and application-oriented, independent solutions. Holland-Controls has experience with control systems for gas turbine installations, reciprocating engines, steam turbines, station control systems and power management systems. This accounts for the complete spectrum of work, including specification, software and hardware design, parts procurement, in-house and on-site testing, subcontracting and supervision for on-site construction, commissioning, hand-over, customer training and support. Holland-Controls offers proven solutions from an experienced dedicated team of engineers, designed and built to European legislation and ISO 9001:2008 and SCC* 2004/04 certified. Our specialist expertise in the field of gas turbine control systems in combination with our brand independency makes Holland-Controls the ideal partner.
Applied Manufacturing Technologies
Orion, MI
Founded in 1989, Applied Manufacturing Technologies, AMT, is North America's largest automation engineering company for supporting robot companies, systems integrators, line builders and users of robotic automation worldwide. We can help you with every stage of the automation cycle, from conceptualizing manufacturing processes to solving cycle time and quality issues on existing systems. AMT is built around seven core engineering technologies that are the keys to flexible automation. We support our customers on projects that range from a single day of consulting to complete outsourcing of their automation engineering functions. Our customers enjoy the AMT Advantage ' let us show you how we can improve your robotic automation programs.
Wunderlich-Malec Engineering
New Albany, OH
Wunderlich-Malec has successfully designed and implemented engineering solutions for commercial, industrial and government clients throughout North America and abroad since 1981. The key to our longevity and continued success is our adaptability combined with the depth of our talent. By offering a comprehensive menu of essential services in combination with a continuous willingness to engage in new challenges, we attract and retain some of the most skilled and sought-after talent in the industry. Wunderlich-Malec is one of the largest and most well-established engineering companies in the United States, with offices throughout the U.S. and more than 400 professionals on staff. We're confident that our qualified staff has the knowledge, experience and talent to create and deliver the solutions you need for your facility, process and operation needs.
Visual Control Sp. z o.o.
Cracow, MA, Poland
Visual Control (VC) provides consulting and system integration services in the sphere of industrial automation projects, software, and hardware. Founded in 1998, VC is an engineering company focused on solutions for business processes that can be powered by plant automation. The company offers I/O servers for devices from world famous vendors like Viessmann, Kamstrup, Danfoss and others.
Zarpac Inc.
Oakville, ON
Since 1989, Zarpac Inc. has delivered specialized engineering expertise throughout the packaging industry. As a significant global player in professional technical and engineering services, Zarpac offers full-spectrum support for the modification and improvement of existing production processes and the development and design of new production processes and custom proprietary machinery and systems. Zarpac works globally, across multiple markets, including food, beverage, healthcare, home care, chemical, pharmaceutical, paper products, personal care products, industrial products and packaged building products. Our services include all aspects of specifications, procurement, engineering, build, installation, operations, training and maintenance as well as consulting and production auditing. Zarpac Inc. also has the software and hardware capabilities in the development and implementation of systems and software for production data and analytics for benchmarking and improving production line systems and their performance; research, development
JMP Engineering Inc.
Vaughan, ON
JMP collaborates with the world's foremost companies applying domain expertise gained from integrating automation, controls, and information solutions in over 8500 projects. The company delivers direct and immediate impact on a client's production performance, quality, safety and profitability. With branch office locations across North America, over 100 professionals on staff, and strong project management capabilities supported by CSIA certification, JMP is able to meet the needs of their regional and international customers both efficiently and affordably.
Comptrol Incorporated
Cleveland, OH
Since 1952, Comptrol Incorporated has been a manufacturer and distributor of linear motion and industrial control products and systems which are divided into four major product groups: linear motion, tension monitoring, quality verification, and distributor products. The firm's expertise in applying products from each of these groups and integrating them into a total package solution to meet the application requirements is the value-added service They offer their customers. All Comptrol products are supported by an experienced team of electrical, mechanical, and software application/design engineers; and with an in-house manufacturing and assembly services, the firm can respond quickly to their customers' needs for standard, modified standard, and custom products and systems.
SSOE Group
Toledo, OH
As automation specialists, SSOE offers complete control engineering services from analysis and recommendations through start-up assistance and training. These specialists have provided services for factory automation, management information systems, computer process controls, instrumentation, computer software design and support, systems analysis, as well as complete turnkey systems. SSOE is experienced in designing real-time integrated control systems utilizing computers and PLCs to provide optimum solutions for factory automation and process control. SSOE's engineers are experts in designing machine and process control systems encompassing hardware schematics, control, instrumentation and operator interface panels, as well as operation and installation documentation. These specialists also develop the control software for programmable controllers, microprocessors, and computer systems. SSOE's varied experience in real-time industrial control using the computer for both control and the information function will ensure the full benefits of an integrated automation system. The information function includes data gathering, sorting, conditioning, storage, and presentation to the process operator and others in the form of alarms, logs, and displays. Tangible benefits are improved process yield, better control of product quality and manpower, plus the intangible benefits of increased process knowledge derived from an intensive study of the process during system design and from data collected during system operation by the information function.
Solution Sources Programming, Inc
San Jose, CA
Solution Sources Programming (SSP) is known for our high level Test and Measurement solutions to automate production ready product lines or for lab use. SSP's combined man years exceeds several hundred years but more importantly is we keep up with current techniques and tap into our wealth of knowledge accumulated over the years. Our customers are our best advertisement as we have customers for over a decade and they refer us to others. Our customers feel we are a true extension of their test departments. Strengths are in In Circuit Test, Benchtop Boundary Scan, and Full Functional/System Integration. Whether a start up or mature company looking to automate test for a lab or production, we can get you there faster and with a more reliable product.
Automation Systems International
Oconomowoc, WI
Automation Systems International is a full service solutions provider, control systems engineering, and integration company. ASI provides turnkey control systems engineering and integration services to meet their customers' productivity demands and needs. ASI supports those customers on a worldwide basis. Services include control systems analysis; control systems electrical design/control panel assembly; control software development; systems integration and testing; system qualification; mechanical design, fabrication, and assembly; complete systems documentation; and training consulting. Please feel free to contact us at 262-367-7171 x104.
Keller Technology Corporation
Huntersville, NC
Keller Technology Corporation has over 95 years of experience in the design and build of special machinery. Core capablities include the design and build of flexible automation systems, special process equipment such as ASME code pressure valves and vessels,and high vacuum fabrication. Keller is also an expert in the design and manufacture of web handling and converting equipment. Keller has over 200 employees and the capability to be a full service supplier of turnkey systems from upfront consulting to engineering, manufacture, installation, training, and documentation of equipment. Expertise in FDA regulated medical, pharma and biotech applications including machinery for aseptic environments. Expertise in semiconductor and engineered materials applications.
